NEEMA3D™ CARBON: PLUS is our PET-G based filament reinforced with 20% carbon fiber. As a result, is a twice stiff filament than the PET-G, with great impact and heat resistance to 80˚C.
NEEMA3D™ gives you great properties, such as a matt surface, no warp, dimensionally stable makes it a suitable choice for a very wide variety of applications besides the typically mentioned RC parts, drones, automotive and more.
- PET-G reinforced with 20% carbon fiber
- Extra stiff and matt surface
- Increased impact and heat resistance
- Warping free
- Abrasive (hardened steel nozzles recommended*)
*The carbon fibers are abrasive and will result in fast wear of regular brass nozzles, therefore hardened steel nozzles are recommended.
|Specific gravity||ASTM D792||1,19 g/cc|
|MFI (300˚C -1,2kg)||ISO 1133||N.D|
|E-modulus 1mm/min||ISO 527||3800 MPa|
Yield stress 50mm/min
|ISO 527||52,5 MPa|
|Yield strain 50mm/min||ISO 527||4,2%|
Strain at breakn50min/min
|Impact Strength Izod Notched 23˚C||ISO 180-1A||3,8 kJ/m²|
Heat Distortion T
NEEMA3D™ Ultimate edition is available in a custom box with transparent spool and a resealed vacuumed bag. The spool helps you to know how much filament is left at any time and with the resealed vacuumed bag you can store your filament to keep the proper humidity even after you open it!